01 / SIX HERB HOLES
Match the opening to the stem.
Choose an opening that lets a suitable herb stem pass through while drawing leaves away. Use gentle pressure; thick woody stems may not suit this tool.
01 / 09Click to explore full screen ↗
Stainless Steel Finger Guards, 2-Pack
Read customer reviews ↗
$13.19 USD
$19.79
A metal shield for the supporting hand during controlled food preparation, with built-in holes for stripping herb leaves.
- Two matching guards
- Adjustable finger rings
- Six graduated herb-stripping holes
Pack size2 guards
FinishChoose Silver or Rose Gold
Built-in feature6 herb-stripping holes
SYOKAMI IN ACTION
See the selected
finish at work.
The brand-published demonstration follows the selected finish. Each film shows the matching guard during food preparation. Knives, boards and ingredients shown are not included.
Choose your toolsPURPOSE IN EVERY CUT
Make room for
considered preparation.
An adjustable ring positions the metal shield on your supporting hand. Six graduated holes add herb stripping to the same compact tool.
DESIGNED WITH PURPOSE
A small tool.
Four useful details.
Explore the herb-stripping holes, adjustable ring, curved lower edge and angled surface before your first use.
02 / ADJUSTABLE RING
Set the fit before cutting.
Gently open or compress the ring for a snug, comfortable fit. It should stay in position without pinching. Stop if the guard shifts or feels uncomfortable.
03 / CURVED LOWER EDGE
A curve around the working area.
The formed lower edge gives clearance around ingredients as shown. Keep all fingertips behind the shield and away from the cutting edge.
04 / ANGLED SURFACE
Move ingredients with control.
The manufacturer illustrates an approximately 50-degree angled surface for moving food. Keep it clear of the sharpened edge and avoid scraping along the cutting edge.
FROM PREPARATION TO PRESENTATION
From fresh herbs
to everyday ingredients.
Choose a stable cutting surface, check the ring fit and keep a slow, controlled cutting motion. Knives, boards and ingredients shown are not included.
Prepare on a stable board.
Use the guard on the supporting hand while keeping the ingredient steady. Maintain a controlled grip on the knife and cut slowly.
Bring a familiar setup outdoors.
Choose a stable preparation surface at the barbecue table and check that the guard stays securely positioned. Outdoor props shown are not included.
Keep fruit preparation deliberate.
Support fruit on a suitable board, maintain visibility of the cutting area and keep fingertips behind the metal shield.
Strip soft herbs in the same routine.
Select one of the six graduated holes and draw a suitable stem through to separate leaves. The herb stripper is part of the guard, not a separate accessory.
Stay attentive through every slice.
A finger guard adds a metal barrier where it covers the hand. It does not guarantee protection from every cut or replace careful knife technique.
A practical two-piece gift.
The silver configuration includes two matching guards in gift packaging. Other kitchen tools, food and props shown are not included.
MATERIAL. FORM. PURPOSE.
Rinse after preparation.
Dry before storing.
Wash with mild detergent and a soft sponge, including around the ring and herb-stripping holes. Rinse thoroughly and dry before storing. Check the fit and surface before each use.
THE DETAILS, AT A GLANCE
Know your tools.
This configuration contains two silver-finish finger guards. The manufacturer size diagram gives an approximately 3-inch width and 2.5-inch height; dimensions are approximate and do not describe packed shipping measurements.
| Product type | Finger guard with integrated herb stripper |
|---|---|
| Pack size | 2 guards |
| Finish | Silver |
| Material | Stainless steel |
| Approximate guard width | 3 inches / 76.2 mm |
| Approximate guard height | 2.5 inches / 63.5 mm |
| Fit | Manually adjustable finger ring; fit varies by finger size |
| Herb stripper | Six graduated holes built into each guard |
| Form | Curved lower edge and approximately 50-degree angled surface |
| Included | Two guards and gift packaging; no knife or cutting board |
KEEP THE EDGE IN GOOD COMPANY
Keep it clean.
Ready for the next meal.
- Wash gently. Use mild detergent and a soft sponge, cleaning the ring and herb-stripping holes as well as the shield.
- Rinse and dry. Rinse away food residue and dry thoroughly before storage. Avoid abrasive cleaners and prolonged soaking.
- Check the fit. Adjust the ring before cutting. Do not use a guard that shifts, pinches, is damaged or has a rough edge.
- Keep a controlled technique. Keep fingertips behind the shield and clear of the knife edge. A guard does not guarantee protection from every cut or replace safe handling.
FROM THE PEOPLE WHO COOK
Good tools.
Honest feedback.
Customer reviews for SYOKAMI Stainless Steel Finger Guards, 2-Pack, including all ratings. Browse the full feedback or sort by date, rating and media.
A FEW GOOD ANSWERS
Before you
start preparing.
Ask our team ↗How many finger guards are included?
Each selected finish contains two matching stainless steel finger guards in gift packaging. Each guard has its own adjustable finger ring and six herb-stripping holes.
Is the herb stripper a separate tool?
No. Six graduated holes are built into each guard. Select a suitable opening and gently draw soft herb stems through to separate leaves.
How do I adjust the finger ring?
Gently open or compress the ring before use for a snug, comfortable fit. Check that the guard stays in position without pinching. Fit varies with finger size.
Does a guard guarantee that I cannot cut myself?
No. It adds a metal shield where it covers the hand, but does not protect every part of the fingers or prevent every cut. Keep fingertips behind the shield and maintain careful knife technique.
Which finish is supplied in this configuration?
Choose Silver or Rose Gold using the Color selector. The selected option updates the main images, included items, demonstration and specification section.
What are the approximate dimensions?
The manufacturer size diagram lists about 3 inches / 76.2 mm wide and 2.5 inches / 63.5 mm high. These are guard dimensions, not packed shipping dimensions.
Is a knife or board included?
No. The package contains two guards and gift packaging. Knives, cutting boards, ingredients and other props in the images and video are not included.
How should I clean and store the guards?
Hand wash with mild detergent and a soft sponge, rinse the ring and holes thoroughly, then dry before storage. Check the fit and surface condition before the next use.
Where can I find shipping, returns and warranty details?
See our shipping information, return policy and lifetime warranty terms. Our support team can help with product questions.